Printer friendly version of 24.04.2019
print
http://www.wieland-plumbing.com/internet/content/imht/en/anwendungenreferenzen/heizl/heizl.jsp

Fuel oil

Installations for light fuel oil in accordance with Technical Regulations for Combustible Liquids TRbF 231/1 and DIN 4755 Parts 1 and 2 can be designed using Wieland SANCO and Wieland WICU tubes. Tubes made from Cu-DHP in strength states R220 (soft) and R250 (half-hard) and the dimensions given in DVGW Working Documents GW 392 may be used. They can be connected using capillary soldered fittings as per DIN EN 1254 Part 1 or threaded clamping ring connectors, without requiring further evidence of suitability. Buried fuel oil lines are to be laid in a protective pipe. Soldered joints are permitted up to DN 25 and PN 10; the only soldering technique acceptable is brazing (brazing solders: AG104, AG106, CP105 and CP203). According to these regulations, threaded cutting rings are not permissible over DN 25.

Current metal prices

Officials (Prompt) 04/23/2019
Cu (Settlement) 6,430.00 in USD/t
Zn (Settlement) 2,882.00 in USD/t
EUR (Bid) 1.12165 USD
All details and charts

All rights reserved

The web sites of wieland.de, their structure with all their functionalities, information, data, text, image and sound materials as well as all necessary components for the functionality of these web sites are subject to the copyright of Wieland-Werke AG. The user is entitled to use the contents only for his personal use and in the context of the functionality of the web sites and does not acquire any rights to the contents or programmes.

The copying or modification in whole or in part is prohibited unless express written permission is obtained from Wieland-Werke AG. This prohibition refers in particular to the production of copies for commercial purposes, the entering of contents and programmes into electronic data bases and the copying on CD-Rom.

© of Wieland-Werke AG, 2002